PS 33 CK Discs with paper backing, self-fastening for Paint, Varnish, Filling compound, Wood

Properties
Bonding agent Resin
Grain Aluminium oxide
Coating Semi-open
Backing C-paper
Materials
Paint
Varnish
Filling compound
Wood
Plastic
Applications
Aircraft construction
Automotive industry
Craftsman companies
Wind energy industry
Wood processing industry

Klingspor’s triangular abrasive paper PS 33 CK is highly versatile

When fitted on a delta sander, the paper will even work on corners and edges with excellent results. The triangular abrasive paper PS 33 CK delivers particularly good results on the following materials:

  • varnish,
  • wood and paint, and
  • filler.

This versatility makes this abrasive paper equally ideal for do-it-yourselfers. One sheet of this paper can be used for almost all materials. This not only helps save cost but also minimises the effort required to change the sheet. Changing the sheet is a snap thanks to the hook and loop fastener of this abrasive paper.

Work swiftly with the triangular abrasive paper PS 33 CK

This abrasive paper is composed of a paper backing (C-paper), which is covered in aluminium oxide grain with a semi-open coating. The grain is bonded to the paper backing (C-paper) by means of synthetic resin. The C-paper gives the abrasive paper the stability needed while keeping the paper flexible enough to contour snugly to the surface to be sanded. The semi-open coating means that 70 to 80 % of the paper backing are covered with abrasive grain. This coating leaves behind an adequate number of spaces between the grains to prevent clogging with dust and debris. Meanwhile, it also allows for a higher stock removal rate.

Aluminium oxide is as effective as it is durable

This synthetically made grain made of crystalline aluminium oxide is both hard and tough. Possessing an irregular wedge shape, this grain wears down by macro abrasion. The triangular abrasive paper PS 33 CK is made available in a variety of grit sizes. The different grits are identified by numbers. The greater the number, the higher the number of grains fixed to the abrasive disc. A greater number of abrasive grains results in a finer finish as the generated force is spread over multiple grain points. In turn, the force acting on each individual point is lower, leading to lower penetration into the material and, ultimately, a finer finish. The triangular abrasive paper PS 33 CK comes in a wide selection of grits ranging from very coarse to fine.

Available grits
16 24 30 36 40 50 60 80 100 120 150 180 220 240 280 320 360 400 500 600 800 1000 1200 1500 2000 2500 3000
Reset filters
Diameter/mm Grit Hole pattern Coated abrasives Type
96
Diameter
40
Grit
hole pattern GLS15
GLS15
Triangular Ø 96 mm
6 holes ø 8 mm on hole circle ø 52 mm
Hole pattern
PS 33 CK
Coated abrasives Type
96
Diameter
60
Grit
hole pattern GLS15
GLS15
Triangular Ø 96 mm
6 holes ø 8 mm on hole circle ø 52 mm
Hole pattern
PS 33 CK
Coated abrasives Type
96
Diameter
80
Grit
hole pattern GLS15
GLS15
Triangular Ø 96 mm
6 holes ø 8 mm on hole circle ø 52 mm
Hole pattern
PS 33 CK
Coated abrasives Type
96
Diameter
100
Grit
hole pattern GLS15
GLS15
Triangular Ø 96 mm
6 holes ø 8 mm on hole circle ø 52 mm
Hole pattern
PS 33 CK
Coated abrasives Type
96
Diameter
120
Grit
hole pattern GLS15
GLS15
Triangular Ø 96 mm
6 holes ø 8 mm on hole circle ø 52 mm
Hole pattern
PS 33 CK
Coated abrasives Type